Chicago Blower CBC industrial pressure
blowers and high pressure radial fans are supplied in cast aluminum,
cast iron, or all-welded construction to prevent flexing at high
pressure. Available in direct drive arrangements 4/4V/4H/7/8 and belt
drive arrangements 1/9S/9T/9H. Capacities: to 10,000 CFM. Single stage
pressure blowers develop up to 4 psi static pressure. Two stage
pressure blowers and multistage pressure blowers are for higher
An extremely wide performance range is provided by 70 blower wheel / housing combinations. The Design 53 Pressure Blower is available in four arrangements and eight discharge positions to suit most every application. In addition to direct drive, the Design 53 Pressure Blower is also available in belt drive.
Applications for High Pressure Blowers:
Chicago Blower Design 53 Pressure Blower single stage pressure blower is designed for combustion, air, fluid bed aeration, cooling, drying and many process system applications. It is also commonly used in pneumatic conveying blower systems.
Operating Range \ of Design 53 Pressure Blowers:
Maximum CFM: 18,000
Maximum Static Pressure: 91" wg
Maximum Temperature: 200°
Fan Sizes: 4" to 14"
DESIGN 38 CAST ALUMINUM PRESSURE BLOWER
Chicago Blower Design 38 aluminum pressure blowers utilize high-strength alloys to create strong, corrosion-free housings and wheels ideal for adverse industrial environments. Aluminum also stands up to sub-zero ambients without material deterioration. Since aluminum is non-magnetic and non-toxic, Chicago's pressure blowers are recommended for both electronic and food related applications. The non-sparking properties qualify Chicago pressure blowers for AMCA Type B spark resistant rating.
Operating Range of Design 38 Pressure Blowers:
Maximum CFM: 4,000
Maximum Static Pressure: 20" wg
Maximum Temperature: 200°
Fan Sizes: 8" to 18-1/2"
PA HIGH PRESSURE RADIAL FAN BLOWERS
To meet specific applications, Chicago Blower CBC PA radial fans can be built with stainless steel or alloy construction. Split housings facilitate wheel removal without disturbing connecting ductwork. Integral inlet boxes, pre-spin inlet dampers and opposed-blade outlet fan dampers all control air flow. Belt guards and shaft coolers are also common options, in addition to the various housing and wheel liners. Chicago Blower engineers are eager to design and build the pressure fan that meets your exact requirements.
Application for CNC PA High Pressure Radial Fans:
Chicago Blower Pressure Air Fans
are at work in as many diverse applications as they are in locations
throughout the world. Clean air applications include combustion air,
air drying primary air ejectors, and product cooling. This fan can
handle pneumatic conveying systems. The PA fan is ideal for corrosive
exhaust, air pollution systems and chemical processing. By adding
ceramic tile or chromium carbide wheel and housing liners, Chicago's PA
fans easily handle abrasive materials. In particular, fans with ceramic
tile liners are extremely effective in pulverized coal applications,
handling up to 250 grains per cubic feet of air. For
corrosive gases, a stainless steel wheel and housing is available, or a
lower cost rubber-lined, mild steel housing will often fulfill the
Operating Range for PA Radial Blowers:
Maximum CFM: 440,000
Maximum Static Pressure: 108" wg
Maximum Temperature: 1000°
Fan Sizes: 20" to 100"
Sale of TCF NYB fans /
blowers, American Coolair ventilators, Aerovent ventilators / fans,
side channel blowers, regenerative blowers, Canarm ventilators, ACME
fans, Leader Delhi fans, ILG ventilators, Plastec propylene blowers,
New York Ventilators, confined space fans and ventilators.
Duct fans are generally used to remove fumes, dirt-laden air, steam, hot air and smoke, in many industries or places where these problems are encountered. The advantages of duct fans are many along with its ability and efficiency to supply air for cooling, drying and ventilation.
In following areas, the use of duct fans have been seen:
• Fan Packs
FRP Construction - Fiber Reinforced Polyester corrosion resistant construction is available for all up-blast power roof ventilators along with protective coatings for corrosive exhaust fumes or atmosphere including synthetic vinyl plastic and a cathalytic epoxy coatings.